Send Email
Send SMS
Search


Prince Pipes

Pioneers in the industry, we offer prince agriculture pipe, prince cpvc pipes, prince swr pipe, prince silent pipe, prince upvc pipes and casing pipe from India.

Prince Agriculture Pipe

REQUEST CALLBACK

Prince Agriculture Pipe
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 80 / MeterGet Latest Price

Product Details:
ColorLight Grey
End ConnectionsSolvent sockets, Rubber Ring sockets
Weight6-10 kg
MaterialUnplasticized Polyvinyl Chloride (UPVC)
BrandPrine
Refernce StandardsIS 4985 2000
Working Temperature of fluidsUpto 60 degree- Continous Upto 90 degree- Short Time -upto 3 mins
Working Temperature2.5, 4, 6, 10 & 12 gk/cm2
Min Outside Diameter20-400 mm
Min Socket Internal Diameter of Mid Point of Socket Length20.1-400.4 mm

Prince Agriculture Pipe are made from highest grade quality resin. These pipes & fittings are mainly used for water supply in agriculture, drip irrigation & sprinkler lines etc as well as for drinking water distribution. However, these can also be used in cable ducting, ventilation pipelines & slurry lines etc.

Cutting:
It is imperative to mark the pipe from all sides so that pipe is cut with the help of a hand saw. It should be a right angle cut from all the sides. The cut piece should not be with the burr on edge.

Chamfering:
After cutting, the pipe needs to be chamfered from the outer sides. It is advisable to provide approximately 2mm wide,150 chamfers on spigot end.

Deburring And Ridge Removal:
Remove all the burrs and ridges accumulated on the inner as well as the outer edges of the pipe with the help of a deburring knife, file or abrasive paper.

Dryfit Test:
Before applying solvent cement, insert the pipe end into the socket of the next pipe or fitting to check that interference occurs at about 1/3 to 2/3 of the socket depth.

Cleaning:
Thoroughly clean the pipe with dry cloth where the solvent cement is going to be applied to avoid dust, dirt, oil, moisture and other foreign materials during the installation process.

Application Of Solvent Cement:
Mark the pipe length to be inserted for jointing.
Apply a liberal coat of solvent cement with the help of the brush on the marked surface.
 
Jointing:
Push the pipe inside the fitting/pipe so that it goes inside equally from all the sides. Wipe off excess solvent cement that comes out of the edges. Hold the joint for one to two minutes so that the jointing is perfect.

Installation And Commissioning:

Pipeline should be installed in proper alignment and along with necessary clamps.

Pressure testing to be done before concealing work.

Pressure testing may be carried out after a curing period of 24 hrs.

 
High-Pressure Pipe:
Size (in mm)Standard Packing20mm4525mm3032mm2040mm1550mm12
 
Agri Pipes:
Size (in mm)Standard Packing
6Kg10Kg20mm-8025mm-5532mm-3540mm352050mm201563mm--75mm--90mm--110mm--125mm--140mm--160mm--180mm--200mm--225mm--250mm--280mm--315mm--355mm--400mm--

Yes! I am Interested

View PDF

Prince CPVC Pipes

REQUEST CALLBACK

Prince CPVC Pipes
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 50 / MeterGet Latest Price

Product Details:
Single Piece Length3 meter
End ConnectionsSolvent Joint
MaterialChlorinated Polyvinyl Chloride (CPVC)
ApplicationDrinking Water
Size/Diameter>4 inch
Size15-50 mm
Refernce StandardsSDR-11 & 13.5 as per IS 157782007 (Size 1/2

Smartfit CPVC Plumbing system is designed for Hot & Cold water which is suitable for all plumbing and potable water application. It has a proven hot & cold water performance from 0° C to 93°C. Its corrosion resistance property makes it usable in all weather & ensures constant flow over the lifetime. This system is used in industrial, residential, commercial & public complexes.

Prince Pipes offers cost-effective and versatile lead-free CPVC pipes. CPVC Pipes are a great alternative solution to GI (galvanized iron) pipes and our comprehensive range of CPVC pipes and fittings will fulfil your every demanding application.

Cutting:

It is imperative to mark the pipe from all sides so that pipe is cut with the help of a hand saw. It should be a right angle cut from all the sides. The cut piece should not be with burr on edge.


Chamfering:

After cutting, the pipe needs to be chamfered from the outer sides. It is advisable to provide approximately 2mm wide,150 chamfer on spigot end.


Deburring And Ridge Removal:

Remove all the burrs and ridges accumulated on the inner as well as the outer edges of the pipe with the help of a deburring knife, file or abrasive paper.


Dryfit Test:

Before applying solvent cement, insert the pipe end into the socket of the next pipe or fitting to check that interference occurs at about 1/3 to 2/3 of the socket depth.


Cleaning:

Thoroughly clean the pipe with dry cloth where the solvent cement is going to be applied to avoid dust, dirt, oil, moisture and other foreign materials during the installation process.


Application Of Solvent Cement:
Mark the pipe length to be inserted for jointing.
Apply a liberal coat of solvent cement with the help of the brush on the marked surface.

 

Standard packing material – SDR 11
Size
(in inch)
Size
(in mm)
Standard Packaging
3mtr5mtr
1⁄2"15mm14080
3⁄4"20mm8050
1"25mm5030
1 1⁄4"32mm3626
1 1⁄2"40mm2414
2"50mm168


Standard packing material – SDR 13.5
Size
(in inch)
Size
(in mm)
Standard Packaging


3mtr5mtr
1⁄2"15mm14080
3⁄4"20mm8050
1"25mm5030
1 1⁄4"32mm3626
1 1⁄2"40mm2414
2"50mm168

Standard packing material – SCH 40
Size
(in inch)
Size
(in mm)
Standard Packaging


3mtr5mtr
2 1⁄2"65mm84
3"80mm53
4"100mm32

 

Standard packing material – SCH 80
Size
(in inch)
Size
(in mm)
Standard Packaging


3mtr5mtr
2 1⁄2"65mm64
3"80mm43
4"100mm32
Yes! I am Interested

Prince SWR Pipe

REQUEST CALLBACK

Prince SWR Pipe
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
ColorLight Grey
MaterialUnplasticized Polyvinyl Chloride (UPVC)
BrandPrince
Reference StandardsIS 13592 2013
Working pressureNon Pressure Application
End ConnectionsRubber Ring & Solvent Joint
VariantsType 'A' & Type 'B'

Prince piping systems has collaborated with a renowned company who manufacture triple-lip sealing rubber seals known as Forsheda 582 Dinlock. These seals along with Ultrafit SWR premium quality UPVC material ensure a long lasting performance. Ultrafit SWR with world class seals are used in building drainage of residential, commercial, industrial & public complexes.

Jointing Method:

Cutting:
It is imperative to mark the pipe from all sides so that pipe is cut with the help of a Hand Saw. It should be a right angle cut from all the sides. The cut piece should not be with burr on edges.

Chamfering:
(This step is required when pipe cutting is done from3 mtr pipe to any required length during installation)After cutting, the pipe needs to be chamfered from the outer sides. It is advisable to provide an approximately2 mm wide,150 chamfer on spigot end.

Deburring And Ridge Removal:
Remove all the burrs and ridges accumulated on the inner as well as the outer edges of the pipe with the help of a deburring knife, file or abrasive paper.

Dryfit Test:
Before applying solvent cement, insert the pipe end into the socket of the next pipe or fitting to check that interference occurs at about 1/3 to 2/3 of the socket depth.

Cleaning:
Thoroughly clean the pipe with dry cloth where the solvent cement is going to be applied to avoid dust, dirt, oil, moisture and other foreign materials during the installation process.

Application of Solvent Cement:
Mark the pipe length to be inserted for jointing. Apply a liberal coat of solvent cement with the help of the brush on the marked surface.

Jointing:
Push the pipe inside the fitting / pipe so that it goes inside equally from all the sides. Wipe off excess solvent cement that comes out from all the edges. Hold the joint for one to two minutes so that the jointing is perfect.

Installation And Commissioning:
  • Pipe line should be installed in proper alignment & along with necessary clamps.
  • Pressure testing may be carried out after a curing period of 24 hrs.

 

Type A (Rubber Ring):
Single Socket
(6 ft.)
Double Socket
(6 ft.)
Single Socket
(3 Mtr.)
Double Socket
(3 Mtr.)
Double Socket
(4 ft.)
Double Socket
(3 ft.)
Double Socket
(2 ft.)
Size in mmSize in mmSize in mmSize in mmSize in mmSize in mmSize in mm
75mm75mm75mm75mm75mm75mm75mm
110mm110mm110mm110mm110mm110mm110mm

Type B (Rubber Ring):
Single Socket
(6 ft.)
Double Socket
(6 ft.)
Single Socket
(3 Mtr.)
Double Socket
(3 Mtr.)
Double Socket
(4 ft.)
Double Socket
(3 ft.)
Double Socket
(2 ft.)
Size in mmSize in mmSize in mmSize in mmSize in mmSize in mmSize in mm
75mm75mm75mm75mm75mm75mm75mm
110mm110mm110mm110mm110mm110mm110mm
     
    Yes! I am Interested

    Prince Silent Pipe

    REQUEST CALLBACK

    Prince Silent Pipe
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    BrandPrince
    ColorOff- White
    Size75-160 mm
    MaterialUPVC
    Type Of ProductType A Rubber Ring Pipe (3 mtr) (10 feet)
    CertificationsNoise behaviour test report in accordance with standard DIN 4109, VDI - 4100 & EN 14366 issued

    Silentfit Piping Systems are three-layered pipes of which, outer and inner layers are made up of UPVC material and the intermediate layer of specially formulated PVC material which serves as a noise insulator, Providing silent operation when water flows through the pipes.

    The pioneers in SWR systems has collaborated with Adequate from Spain the European leader in low noise piping systems. Due to this collaboration, our customers will get this premium technological offering of Silentfit fireproof fittings in India. These are also made up of a specially formulated PVC material which serves as the noise insulator. These are designed to ensure smooth flow of water passing through the system, thus further reducing the noise level, providing silent operation.
    Yes! I am Interested

    Prince UPVC Pipes

    REQUEST CALLBACK

    Prince UPVC Pipes
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    ColorWhite
    MaterialUnplasticized Polyvinyl Chloride (UPVC) with U.V. Resistance
    Refernce StandardsSch- 40 , 80 & 120 s per ASTM D- 1785
    End ConnectionsSolvent Joint
    Size15-150 mm

    Easy fit UPVC plumbing system is a ‘LEAD-FREE’ solvent weld system designed for distribution of potable water that is technically superior and offers many advantages over conventional G.I. Piping system. This system is easy to install and offers a long service life. It is used mainly for cold water application in residential, Commercial and public complexes..

    Cutting:

    It is imperative to mark the pipe from all sides so that pipe is cut with the help of a hand saw. It should be a right angle cut from all the sides. The cut piece should not be with the burr on edge.


    Chamfering:

    After cutting, the pipe needs to be chamfered from the outer sides. It is advisable to provide approximately 2mm wide,150 chamfers on spigot end.


    Deburring And Ridge Removal:

    Remove all the burrs and ridges accumulated on the inner as well as the outer edges of the pipe with the help of a deburring knife, file or abrasive paper.


    Dryfit Test:

    Before applying solvent cement, insert the pipe end into the socket of the next pipe or fitting to check that interference occurs at about 1/3 to 2/3 of the socket depth.


    Cleaning:

    Thoroughly clean the pipe with dry cloth where the solvent cement is going to be applied to avoid dust, dirt, oil, moisture and other foreign materials during the installation process.


    Application Of Solvent Cement:
    Mark the pipe length to be inserted for jointing.
    Apply a liberal coat of solvent cement with the help of the brush on the marked surface.

     

    Jointing:
    Push the pipe inside the fitting/pipe so that it goes inside equally from all the sides. Wipe off excess solvent cement that comes out of the edges. Hold the joint for one to two minutes so that the jointing is perfect.

    For Threaded Joints:
    • Clean the Male & Female threads.
    • Apply teflon tape in the direction of thread tightening.
    • Hand-tighten the threads firmly.
    • Tighten the joint more by using the pipe wrench. Do not over tighten. Use rubber packing to avoid scratches on the pipe.


    Installation and Commissioning:
    • Pipeline should be installed in proper alignment & along with necessary clamps.
    • Pressure testing to be done before concealing work.
    • Pressure testing may be carried out after a curing period of 24 hrs and should not be done before that.
     

    Also Available Size:

    Size
    ( in mm )
    Sizes
    ( in inches )
    Sch-40
    (3 mtr)
    Sch-40
    (6 mtr)
    Sch-80
    (3 mtr)
    Sch-80
    (6 mtr)
    15mm1⁄2"60305026
    20mm3⁄4"44243618
    25mm1”30162614
    32mm1 1⁄4"24121810
    40mm1 1⁄2"2010148
    50mm2”148106
    65mm2 1⁄2"9484
    80mm3”7363
    100mm4"5242
    150mm6"2121
    Yes! I am Interested

    Casing Pipe

    REQUEST CALLBACK

    Casing Pipe
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Length3m
    Nominal Size2 inch
    ColorBlue
    MaterialCPVC
    ShapeRound

    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Tripathi Hardware & Mill Store
    Suraj Tiwari (Owner)
    No. 2771, 1st Floor, Peepal Mahadev Hauz Qazi, Chandni Chowk,
    New Delhi - 110006, Delhi, India
    Call Us: 
    Call Response Rate: 88%
    Share Us :
    F G T L



    Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

    © Tripathi Hardware & Mill Store. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Tripathi Hardware & Mill Store